Construction projects require the
installation of fencings with an aim to secure the site, protect the general public
and workers and support construction works. Construction fences are essential
as the construction sites involve lots of tools, equipment, and machinery to
pose possible hazards to people entering the area.
Therefore, if you are managing a
construction site, you can consider construction fencing as a wise option. You
can easily get it from a reputed Construction Fence Rental who
can deliver high-quality fences for your work site. Get it installed before the
commencement of your construction project and then you can remove them after
completion.
Favorable places to install a
construction fencing is around new building construction sites, demolition
areas, extensive alteration or open excavation, etc.
How to properly install
construction fencings?
While installing construction fencing,
you should not end up making it as an obstruction that can prevent public
access to connected sidewalks, egress path of a building, and so on. You need
to keep in mind the protection and convenience of pedestrians as well during
construction fence installment.
So, when you take Temporary
Fence Rental, install fencings at a grade level for sites that
are partially enclosed in order to prevent people from accessing the site. In the case of fully enclosed sites, you need to install it at a location along the
sidewalk’s inside edge, along with property edges, and whatever necessary.
What are the components of
fencing that demand your attention?
·
Material
Taking into consideration the
security and safety requirements of construction sites, you must always go for
a sturdy, robust, and durable material used in the construction fencing. You
can use metal fencings such as steel and aluminum or wood. If you are using
chain-link materials, it must be prepared with materials that are new and good
in condition. You can also use steel mesh that is galvanized along with posts,
while gates can be covered with an opaque cloth.
·
Height
Construction fencings are available
in different heights; shorter and longer. However, make sure to use a fence
with a minimum of 8-feet high.
·
Structural supports
All the supports like posts, frames,
rods, and braces used at different design intervals in order to resist the
impacts of wind, must be of good quality. They must also secure and support the
entire fence length.
·
Color
Many types of fencings are available
especially steel fencings that are customizable. You can paint it according to
your needs and the requirements of the project in order to indicate the
construction work going on at the site.
Furthermore, you might have seen many
events that use Special Events Fence Rental and they
color as per the theme or decorations in the event. It adds an aesthetic look
to the place.
·
Viewing panels
Viewing panels of generally 12x12
inch in length and breadth are installed in the fencings so that you can view
the site from outside. You can use at least one panel for every frontage of 25
feet. These panels are installed about 3-6 feet above the ground and they can
be blocked with the help of a non-frangible or transparent material like
plexiglass.
·
Gates
You can install gates wherever required
in order to access the site. The side of the fence facing the street can have
gates made up of the same material as that of the fence.
·
Panel for Project information and sign
You must include a panel to indicate
the project information along with signs so that people can have an idea as to
what is going on and why they should not enter the site.
Thus, these were some of the
components that are necessary when you install construction fencing. Choose
only a reliable rentals service to get Emergency Response to
all your queries when required.
Comments
Post a Comment